Application：

This product is suitable for connecting indoor and outdoor solar photovoltaic system circuits under extreme weather conditions

Standard：

2PfG 1169/08.2007 (PV1-F)

Structure：

Conductor: Stranded tinned copper wire in accordance with DIN VDE 0295 and IEC 60228 Class 5

Insulation: electron beam cross-linking, low smoke halogen-free flame retardant composite

Sheath: electron beam cross-linked, low smoke halogen-free flame retardant composite, black

Electrical performance：

Rated voltage U0/U: 0.6/1 kV AC;  0.9/1.5 kV DC

Maximum allowable AC voltage: 1.8 kV DC (conductor/conductor, ungrounded system, circuit without load)

Insulation resistance: 1000 MΩ-km

Spark test: 6000 Vac (8400 Vdc)

Voltage endurance: 6500 Vac for 5 min

Thermal performance：

Indoor temperature:- 40℃ ~ +90℃

Maximum temperature of conductor: IEC/EN 60216-1 120℃ (20000h)

Short circuit temperature: 200℃/5 s

Heat resistance test: EN 60216-2 (temperature+120 ° C)

High temperature pressure test: EN 60811-3-1

Moisture and heat resistance: EN60068-2-78，  85% humidity

Mechanical properties：

Minimum bending radius: 4×OD (fixed), 5×OD (flexing)

Dynamic penetration: 2 PfG 1169/08.2007 Appendix F

Slot propagation: 2 PfG 1169/08.2007 Appendix G

Tensile strength and elongation of insulation layer and sheath: EN 60811

Expected service life: 25 years

CHEMICAL:

Ozone resistance: EN 50396 Part 8.1.3 Method B

Weathering and UV resistance: HD 605/A1

Ammonia resistant

Good resistance to oil and chemical corrosion

Good wear resistance and aging resistance

Acid and alkali resistance: according to EN 60811-2-1 (oxalic acid&sodium hydroxide)

EC indicators:

This cable complies with CE 2006/95/EC (low voltage regulations) and RoHS 2002/95/EC (regulations restricting the use of hazardous substances) in European standards

Fire performance:

Flame retardant performance specified in EN 50265-2-1, IEC 60332-1, VDE 0482-332-1-2, DIN EN 60332-1-2

Low smoke performance specified in IEC 61034, EN 50268

Halogen free performance specified in EN 50267-2-1, IEC 60754-1

Low corrosive gases specified in EN 50267-2-2 and IEC 60754-2

Specifications and dimensions:

current carrying capacity：

Conversion coefficient deviating from temperature：