application

PUR flexible servo motor cable is suitable for the main connection line of variable frequency motors, used for large loads, oil resistance, indoor and outdoor applications, and UV resistance. By effectively combining signal transmission lines and power lines, protection and braking functions can be integrated. Suitable for vertical or vertical stacking and retrieval orders in elevated aisle warehouses, machine tools, production lines, clean rooms, semiconductor insertions, outdoor cranes, and other fields.

structure

Compliant with VDE0295/IEC228 Class 5, multi strand fine twisted copper wire conductor

High mechanical performance, low capacitance PVC/TPE mixture insulation

The power line and signal pair are twisted together as a whole

(2-core twisted signal cable, shielded with aluminum foil or wrapped with polyester tape, can be covered with tinned copper wire weaving)

Whole non-woven fabric wrapping

Highly resistant to bending, tinned copper wire braided with 85% shielding

General contractor non-woven fabric layer

Highly wear-resistant and oil resistant PUR based mixture outer sheath suitable for drag chains

characteristic

Has resistance to mineral oils and high wear resistance, acid, alkali, solvents, hydraulic oil, etc

Suitable for drag chains, with an ultra long service life

High density weaving shielding enables interference free transmission of signals and pulses

Flexible at low temperatures, no adhesion after peeling off the sheath

No harmful substances, compliant with RoHS standards

This product complies with the provisions of EEC Regulation 73/23 (Low Voltage Regulation) CE

Compliant with CE/TUV and other standards

The PUR series servo cable design has approximately 5 million cycles of bending in the drag chain

performance

Working voltage: 600/1000V

Insulation resistance:> 20 MOhm x cm 

Minimum bending radius:

Mobile installation: 7.5x cable outer diameter Fixed installation: 4x cable outer diameter

Temperature range for use:

Mobile installation: -5 ℃ to+90 ℃

Fixed installation: -30 ℃ to+90 ℃

Core wire grounding identification: G=with green/yellow dual color grounding identification

X=No green/yellow dual color grounding identification

Radiation resistance intensity: up to 5 × 107cJ/kg