Hotline：
+86 15542446883
-
Phone：
15542446883
Solar cable
Application：
This product is suitable for connecting indoor and outdoor solar photovoltaic system circuits under extreme weather conditions.
Standard：
2PfG 1169/08.2007 (PV1-F)
Structure：
Conductor: Stranded tinned copper wire in accordance with DIN VDE 0295 and IEC 60228 Class 5
Insulation: electron beam cross-linking, low smoke halogen-free flame retardant composite
Sheath: electron beam cross-linked, low smoke halogen-free flame retardant composite, black，red
Electrical performance：
Rated voltage U0/U: 0.6/1 kV AC; 0.9/1.5 kV DC
Maximum allowable AC voltage: 1.8 kV DC (conductor/conductor, ungrounded system, circuit without load)
Insulation resistance: 1000 M Ω - km
Spark test: 6000 Vac (8400 Vdc)
Voltage endurance: 6500 Vac for 5 minutes
Thermal performance：
Indoor temperature: -40 ℃~+90 ℃
Maximum temperature of conductor: IEC/EN 60216-1 120 ℃ (20000h)
Short circuit temperature: 200 ℃/5s
Heat resistance test: EN 60216-2 (temperature+120 ° C)
High temperature pressure test: EN 60811-3-1
Moisture and heat resistance: EN60068-2-78, 85% humidity
Mechanical properties：
Minimum bending radius: 4 × OD (fixed), 5 × OD (flexible)
Dynamic penetration: 2 PfG 1169/08.2007 Appendix F
Slot propagation: 2 PfG 1169/08.2007 Appendix G
Tensile strength and elongation of insulation and sheath: EN 60811
Expected service life: 25 years
CHEMICAL：
Ozone resistance: EN 50396 part 8.1.3 method B
Weathering and UV resistant: HD 605/A1
Ammonia resistant
Good resistance to oil and chemical corrosion
Good wear resistance and aging resistance
Acid and alkali resistance: according to EN 60811-2-1 (oxalic acid&sodium hydroxide)
EC indicators：
This cable complies with CE 2006/95/EC (low voltage regulations) and
RoHS 2002/95/EC (regulations restricting the use of hazardous substances) in European standards
Fire performance：
Flame retardant performance specified in EN 50265-2-1, IEC 60332-1, VDE 0482-332-1-2, DIN EN 60332-1-2
Low smoke performance specified in IEC 61034, EN 50268
Halogen free performance specified in EN 50267-2-1, IEC 60754-1
Low corrosive gases specified in EN 50267-2-2 and IEC 60754-2
Specifications and dimensions：
| Number of cores&nominal cross-sectional area | Number of shares/cables diameter |
Nominal Conductor Diameter | Nominal insulation thickness | Nominal Jacket Thickness | Nominal outer diameter | nominal weight |
|---|---|---|---|---|---|---|
| No. ×mm² | - | mm | mm | mm | mm | kg/km |
| 1×1.5 | 30/0.25 | 1.58 | 1.14 | 0.82 | 5.4 | 52 |
| 1×2.5 | 50/0.25 | 2.04 | 1.14 | 0.82 | 5.8 | 67 |
| 1×4.0 | 56/0.30 | 2.59 | 1.14 | 0.82 | 6.4 | 87 |
| 1×6.0 | 84/0.30 | 3.17 | 1.14 | 0.82 | 7.0 | 113 |
| 1×10 | 78/0.40 | 4.07 | 1.52 | 0.82 | 8.6 | 178 |
| 1×16 | 128/0.40 | 5.22 | 1.52 | 0.82 | 9.8 | 254 |
| 1×25 | 199/0.40 | 6.51 | 1.52 | 0.82 | 11.1 | 363 |
| 1×35 | 279/0.40 | 7.71 | 1.52 | 0.82 | 12.3 | 473 |
current carrying capacity：
| conductor cross-section | AWG | Maximum conductor resistance at 20 ℃ | current carrying capacity | ||
|---|---|---|---|---|---|
|
Single exposed to the air Root cable |
A single piece exposed on the surface cable |
Several exposed on the surface Adjacent cables | |||
| mm² | - | Ω | A | A | A |
| 1.5 | 16 | 13.7 | 30 | 29 | 24 |
| 2.5 | 14 | 8.21 | 41 | 39 | 33 |
| 4 | 12 | 5.09 | 55 | 52 | 44 |
| 6 | 10 | 3.39 | 70 | 67 | 57 |
| 10 | 8 | 1.95 | 98 | 93 | 79 |
| 16 | 6 | 1.24 | 132 | 125 | 107 |
| 25 | 4 | 0.795 | 176 | 167 | 142 |
| 35 | 2 | 0.565 | 218 | 207 | 176 |
Conversion coefficient deviating from temperature：
| indoor temperature | transform coefficient |
|---|---|
| Up to 60 | 1.00 |
| 70 | 0.91 |
| 80 | 0.82 |
| 90 | 0.71 |
| 100 | 0.58 |
| 110 | 0.41 |
CONTACT US
Shengdong Cable Co., Ltd
Phone：+86 15542446883
Email：alladu0399@gmail.com
Address：713, Unit 52, Beiyi West Road,
Tiexi District,Shenyang City,
Liaoning Province ，China
MESSAGE
CONTACT US
Shengdong Cable Co., Ltd
Phone：+86 15542446883
Email：alladu0399@gmail.com
Address：713, Unit 52, Beiyi West Road, Tiexi District,
Shenyang City, Liaoning Province ，China
MESSAGE